In this article we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and techniques which you can use.

If you have a dog that likes to bark, and especially if your dog loves to play in the garden and other regions of the home, you will need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up http://foxroc.com/blog/the-best-affordable-dog-food-finding-the-perfect-type-of-inexpensive-dog-food/ which will look a little scary at first, but it is actually quite straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not just cut a rectangular shape out of the cardboard, so you’ll need to cut around the edge of the mask so you get something which looks like a cone. The most important thing here is to be realistic with what kind of paper plate which you’re using.

Then you’ll need to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so that you can make certain that nothing will leak when you place the mask on. Make sure that the edges are cut so that the edges aren’t sharp, as this can damage the edges of the mask.

Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask first, so you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.

Don’t fret too much about the paint getting stuck into your mask. It’s easy to remove it later, and it will leave you with a nice finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint once you’re done, so you don’t end up with smudges or smears on your dog.

Then it is time to glue the mask on your dog’s head. First you will need to make sure that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it is secure, then you can begin to glue the mask onto the dog’s face. Take the piece of cardboard that is used for the base of the mask and then fold it over. Be sure that it’s quite powerful and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you’ve got the mask snugged securely onto the face of your dog. Do not make the folds too big or else it might look messy. Once you’ve completed this, you can then take out the mask and attach the cardboard ears. And attach the other part of the mask on the dog. Be sure that the ears are flat and be sure that it’s not too short or long as this will cause some problems with the mask slipping off the dog’s face.

If you are using a dog mask because your pet security, you’ll have to do some sanding to make sure that it is secure on your dog. You can do this by sanding off any excess paper which might have been removed from your mask.